118 Part Number STH025 8/12
RESET TO FACTORY DEFAULTS
Before starting troubleshooting procedures, reset the
control board to factory defaults to prevent
misdiagnosis. Before resetting to factory defaults do
one of the following:
A. Copy settings to a usb device and flash
settings into the control board when
diagnostics are complete.
B. Write down any customer settings so they
can be re-entered when diagnostics are
complete.
This procedure also resets the password to the factory
default. The default factory password is 1234. To reset
the ice machine to factory defaults “Reset Password
To Factory Defaults” on page 66
To Next Page
Loading...
Need help?
General