Part Number STH025 8/12 135
Installation/Visual Inspection Checklist
Inadequate Clearances
• Check all clearances on sides, back and top.
Reference
“Clearance Requirements” on page 31
Ice machine is not level
• Level the ice machine
Condenser is dirty
• Clean the condenser
Water filtration is plugged (if used)
• Install a new water filter
Water drains are not run separately and/or are not
vented
• Run and vent drains according to the Installation
Manual
Line set is improperly installed
• Reinstall according to the Installation Manual
Reference
“Lineset Applications” on page 34
To Next Page
Loading...
Need help?
General