166 Part Number STH025 8/12
5. Scroll down until brackets are in the space below
“Input Model #”. Press the right arrow to activate
the blinking cursor, then use the up/down arrows
to select the first character in the model number.
Use the right arrow to move to the next space.
Add characters in this manner until the model
number is complete. The model must include the
dash and the last three numbers to indicate the
electrical requirements ( example -261). Press the
right arrow until the cursor disappears.
6. Scroll down until brackets are in the space below
“Input Serial#”. Press the right arrow to activate
the blinking cursor, then use the up/down arrows
to select the first character in the serial number.
Use the right arrow to move to the next space.
Add characters in this manner until the serial
number is complete. Press the right arrow until
the cursor disappears.
7. Scroll down and select exit, then press
checkmark.
8. Reboot ice machine by disconnecting power for a
minimum of 15 seconds, then reapply power.
To Next Page
Loading...
Need help?
General