Safety hazard: electricity
Danger Where or in what situations does the
hazard arise?
Preventive action
Risk of electric shock
caused by a short-cir‐
cuit
If the appliance comes into contact
with water
■
Do not wash down the outer case
with water
■
Always keep the USB cover
closed during cleaning
Risk of electric shock
from live parts
If appliances on wheeled stands
start moving unintentionally and the
power supply is pulled off
■
Before operation, check that the
retaining device is connected,
which restricts the range of move‐
ment of the platform plus appli‐
ance.
■
When operating the appliances, al‐
ways engage the parking brake on
the wheels
■
Check that wheel brakes are on
before operation each day
Safety hazard: gas
Danger Where or in what situations does the
hazard arise?
Preventive action
Explosion hazard from
gas
If the appliance is moved For appliances on a wheeled plat‐
form and with a flexible connection
pipe:
■
Do not move the appliance for‐
ward beyond its range of move‐
ment when cleaning the case or
the floor. The range of movement
is set by the retaining device used
to secure the appliance in place
(typically 0.5 m).
■
Never strain the connecting cables
or pipes.
Safety hazard: mechanical parts of the appliance
Danger Where or in what situations does the
hazard arise?
Preventive action
Risk of injuries from ro‐
tating fan
If the cooking chamber is being
cooled using 'Cool down' with the
appliance door open and the fan
wheel is exposed because the suc‐
tion panel is not fitted
Make sure that the suction panel is
fitted and secured in place
Risk of crushing to
hands and pinching of
fingers
When opening and closing the dou‐
ble glass door
Exercise caution when performing
this action
3 For your safety
User manual 36