Item Safety device Function Check
5
Venting position of ap‐
pliance door
Prevents scalding of user's
face and hands from escaping
steam
When appliance is cool, check
door positions as described in
'Opening and closing the ap‐
pliance door safely' on page
59
6
(no picture)
Safety thermostat
■
Boiler
■
Cooking chamber
Switches off the appliance if
temperature too high
An error code is output in the
event of a fault
(Please contact an authorized
service company to reset the
safety thermostat)
7
(no picture)
Restart after power
failure in case clean‐
ing agent was left in
the appliance
Restarts fully automatic oven
cleaning in a defined state af‐
ter power failure
None
8
(installed by
customer)
Disconnection device Used to disconnect the appli‐
ance from the power supply
during cleaning, repair and
servicing work and in a haz‐
ardous situation
There is no need for the user
to perform a test.
9
(installed by
customer)
Gas shut-off device Used to disconnect the appli‐
ance from the gas supply dur‐
ing cleaning, repair and serv‐
icing work and in a hazardous
situation
There is no need for the user
to perform a test.
10
(no picture)
Only when installing
on a wheeled stand:
Retaining device
Restricts the range of move‐
ment of the assembly (plat‐
form plus appliance) at the
customer's site.
Check that the retaining de‐
vice is connected
3 For your safety
User manual 39
To Next Page
Loading...
Need help?
General
