3.
Place the food onto the required shelf levels.
■
Start from the bottom.
■
Always slide in containers, baking trays or shelf grills as
far as they will go.
Check that you have inserted the containers, baking trays
and shelf grills correctly, as specified in 'Placing food con‐
tainers in appliances of size X.10' on page 42 or 'Placing
food containers in appliances of size X.20' on page 44.
4.
Re-close the shelf retaining bar
When using U-rails:
By lifting the bar then pivoting it through 180° to the right
before letting it drop back into place.
When using L-rails:
By lifting the bar then pushing it to the right as far as it will
go before letting it drop back into place.
Removing food (standard model, fitted with racks)
1.
Open the appliance door.
2.
Hold the food horizontally when removing it.
Removing food (marine model, fitted with racks)
1.
Open the appliance door.
2.
Open the shelf retaining bar on the left-hand rack
When using U-rails:
By lifting the bar and then pivoting it through 180° to the
left.
When using L-rails:
By lifting the bar and then pushing it to the left as far as it
will go.
4 Cooking procedures
User manual 63
To Next Page
Loading...
Need help?
General
