46 Part Number STH044 10/13
17. Remove agitator bar.
• RNS012 - Remove the thumbscrew and lift off.
• RNS020 - Unscrew the upright agitator bar.
NOTE: Bar must be reassembled by inserting front
edge into the paddle wheel, then lowering the back
edge (rounded 90 angle) to prevent water leakage into
the compressor compartment.
RNS012 REMOVE THUMBSCREW
AND AGITATOR BAR
RNS020 REMOVE
AGITATOR,
AGITATOR BAR AND
ICE BREAKER
To Next Page
Loading...
