Manitowoc UG040A Technician's Handbook

15
SPRAY BAR
The spray bar supplies water to the individual ice-
making cups. Water from the Water Pump sprays
through the nozzles, located on the upper portion of
the tubes.
1. Grasp one end of the spray bar, lift up and remove
from seat formed in water trough.
2. Remove both plastic clips on water inlet tubing by
grasping both ears on clip and separating.
3. Apply food grade lubricate to ease re-assembly of
spray bar components when necessary.
4. To re-install spray bar, position water inlet tubing
on inlet ports, and squeeze clips until tight.
5. Reposition assembly on water trough seat.
NOTE: Nozzles and inserts can be removed for
cleaning by unscrewing nozzles. Inserts are located
inside the spray bar ports. The spray bar also
disassembles for easy cleaning

Manitowoc UG040A Specifications

General

Brand	Manitowoc
Model	UG040A
Category	Ice Maker
Language	English