Installation manual I Manusa
D01230EN-v4
31.3 Site
1. Description
The Manusa program switch enables the control of the automatic door and the receipt of feedback about the state of
the door.
This data is transmitted via the Manusa bus.
The screen and its illuminated indicators, which are visible from a distance, enable the identification of the various
states in an easy and intuitive manner. Its touch keypad removes the need for mechanical interaction to achieve
maximum user-friendliness.
The reduced dimensions and discreet design enable the integration of the switch into diverse architectural environments
or into the cover of the operator itself, producing a surface mechanism that is both simple and functional.
1.1 Technical specifications
Applicable norms
Low Voltage Directive
2014/35/CE
Electromagnetic Compatibility Directive
2014/30/CE
Construction Products Regulation 2011/305/CE
Machinery Directive
2006/42/CE
Power operated pedestrian doorsets - Safety in use -
Requirements and test methods
EN 16005
Power supply
12 Vcc
Consumption Ca. 45 mA / Inrush 140 mA
Connection to door Manusa communication bus
Screen Segments LED indicators, 49 x 16 mm
Working temperature range
De -15°C to 50°C
Dimensions
80 x 80 x 11 mm
Use
Inside only
Weight
36 g
Maximum cable length
100 m
1.2 Compatibility
Product Visio+ electronics
Optima+
By Cable Bus
Manusa 1 m
By Cable Bus
Manusa 5 m
1.3 Site
1.3.1 Physical and environmental requirements
Automatic doors by Manusa are allowed to be installed only in places that meet the following requirements:
• Smooth, level and even floor
• Stable walls with sucient load-bearing capacity
• Levelled partition profiles
• No vibrations and shocks in the vicinity of the door
• Operating temperature between -15°C and +35°C
• Relative air humidity: The electrical and electronic operating elements produced to work in tropical climates are
given a surface treatment that protects them from the surrounding humidity.
To Next Page
Loading...
