A
UNBALANCED RCA INPUT connectors
Used to connect a preamplifier with UNBALANCED RCA output
connectors.
B
RCA/XLR INPUT selector
Switches according to the jack used for connecting to the preamplifier
(UNBALANCED RCA or BALANCED XLR).
C
NORMAL/BI-AMP/BTL selector
You can set a bi-amp connection and BTL connection for the power
amplifier of each of the two channels.
D
BALANCED XLR INPUT connectors
Used to connect a preamplifier with BALANCED XLR output
connectors.
E
Speaker terminals (SPEAKERS)
Used to connect speakers. (v p. 16)
F
AUTO STANDBY selector
When the auto standby function is set to “ON”, the power of this unit
automatically enters standby after 15 minutes of no input signal and no
operations. (v p. 25)
G
AMP CONTROL jacks
Use these to connect to a Marantz preamplifier with AMP CONTROL
jacks. This enables operations to be performed simultaneously on this
unit and the preamplifier, such as turning the power on or placing it on
standby and adjusting the brightness of the illumination. (v p. 20)
Contents
Connections Playback Tips Appendix Specifications
9
Front panel Rear panel Index
To Next Page
Loading...
