6. Laser on time
Turn on the AC plag while pressing the
"
8
/
6
"
and
"
3
"
button on this unit.
• One count corresponds to 10 minutes. (Values under 10 minutes are discarded.)
• When the time exceeds 10922 hours, the stored data is not updated and the value is xed 10922.
Initialization of a count value
• When the
"
1
"
button is pressed for over 5 seconds while the accumulated laser on time is displayed, the count value
is reset.
• After resetting is completed, the display in 6(00000hours on the top line) reappears.
• Initialization of a count value is performed upon shipment from the factory and when the mechanism is replaced.
7. Timer check mode
Not for service.
Exit to Power off.
X XX XX
26
To Next Page
Loading...
