Marantz CD5005 - Firmware Update: Completion and Verification; Successful Update Confirmation; Unit Initialization After Update; Verifying Firmware Version

(9) If the software is updated successfully,
"OK."
appears. Click OK.
Disconnect mains cord from the unit, and then disconnect FFC of connection JIG from the unit.
(10) Initializing the unit. Remove the AC plug.
Press the
"OPEN/CLOSE"
and
"
3
"
buttons simultaneously while inserting the AC plug to turn the power on.
(11) After updating the rmware, check the version.
Press the
"OPEN/CLOSE"
and
"
1
"
buttons simultaneously while inserting the AC plug to turn the power on.
31