Do you have a question about the Marantz MR235 and is the answer not in the manual?
Brand | Marantz |
---|---|
Model | MR235 |
Category | Stereo Receiver |
Language | English |
Procedures and information required for ordering Marantz replacement parts.
Contact addresses for ordering Marantz parts in Canada, Australia, Japan, and Europe.
Identifies the tuner unit mounted on P.W. Board P100.
Identifies the phono amplifier unit mounted on P.W. Board P400.
Identifies the main amplifier and power supply unit on P.W. Board P700.
Identifies the antenna input unit on P.W. Board PC00.
Identifies the tone amplifier unit on P.W. Board PE00.
Identifies the power transistor unit on P.W. Board PN01.
Identifies the filter and switch unit on P.W. Board PS00.
Identifies the LED unit mounted on P.W. Board PY01.
Step-by-step instructions for FM IF, FM RF, and Muting circuit alignment.
Procedures for aligning the multiplex stereo decoder section.
Step-by-step instructions for AM IF and AM RF alignment procedures.
Procedures for aligning the audio circuits.
Provides a high-level functional overview of the receiver's internal signal flow.
Exploded view and parts list for the front panel assembly.
List of electrical parts specific to the Tuner circuit board (P100).
List of capacitors for the P100 Tuner board.
List of resistors for the P100 Tuner board.
List of miscellaneous parts for the P100 Tuner board.
List of capacitors for the P400 Phono board.
List of resistors for the P400 Phono board.
List of semiconductors for the P400 Phono board.
List of miscellaneous parts for the P400 Phono board.
List of capacitors for the P700 Main Amp/Power Supply board.
List of resistors for the P700 Main Amp/Power Supply board.
List of semiconductors for the P700 Main Amp/Power Supply board.
List of capacitors for the PE00 Tone Amp board.
List of resistors for the PE00 Tone Amp board.
List of semiconductors for the PE00 Tone Amp board.
List of miscellaneous parts for the PE00 Tone Amp board.
Specifications related to the amplifier's power output, distortion, and frequency response.
Specifications for FM and AM tuner sensitivity, selectivity, and distortion.
General specifications including power requirements, dimensions, and weight.