Panel lock function
To prevent accidental operation of this unit, you can disable operation of
the buttons on the front panel.
.
X
ZONE2 SOURCE TUNER PRESET CH +
DIMMER
TUNER PRESET CH
-
STATUS
Disabling all key button operations
1
Press
X while you press and hold TUNER PRESET CH
+ and DIMMER with the unit in standby mode.
2
Use ZONE2 SOURCE or TUNER PRESET CH – to select
“FP/VOL LOCK On”.
3
Press STATUS to enter the setting.
All button operations except X are disabled.
Disabling all button operations except
VOLUME
1
Press
X while you press and hold TUNER PRESET CH
+ and DIMMER with the unit in standby mode.
2
Use ZONE2 SOURCE or TUNER PRESET CH – to select
“FP LOCK On”.
3
Press STATUS to enter the setting.
All button operations except X and VOLUME are disabled.
Contents Connections Playback Settings Tips Appendix
101
Front panel Display Rear panel Remote Index