Marantz NR1200 - Adjusting the volume; Turning off the sound temporarily (Muting); Playback a DVD player;Blu-ray Disc player

Adjusting the volume
1
Use VOLUME
df to adjust the volume.
0
The variable range differs according to the input signal and channel level setting.
0
You can also adjust the master volume by turning VOLUME on the main unit.
Turning off the sound temporarily
(Muting)
1
Press MUTE
:.
0
MUTE indicator on the display flashes.
0
: appears on the TV screen.
0
The sound is reduced to the level set at “Mute Level” in the menu. (v p. 116)
0
To cancel mute, either adjust the sound volume or press MUTE : again.
Playback a DVD player/Blu-ray Disc
player
The following describes the procedure for playing DVD player/Blu-ray Disc
player.
1
Prepare for playback.
A
Turn on the power of the TV, subwoofer and player.
B
Change the TV input to the input of this unit.
2
Press POWER
X to turn on power to the unit.
3
Press Blu-ray/DVD to switch an input source for a
player used for playback.
4
Play the DVD player or Blu-ray Disc player.
0
This unit supports analog audio signals and PCM 2-channel signals. To play DVDs
and Blu-ray Discs, set “PCM 2ch” as the audio format in the audio device settings.
Contents Connections Playback Settings Tips Appendix
48
Front panel Display Rear panel Remote Index