Marantz NR1504 User Manual (English)

Other manuals for Marantz NR1504

Specification Sheet2 pages

Getting Started10 pages

Manual Del Usuario146 pages

Getting Started Guide10 pages

Antes De Empezar10 pages

Questions and Answers:

J
Jonathan Dickerson DDSAug 19, 2025
Why is there no audio output from my Marantz Receiver?
- C
  codychavezAug 19, 2025
  If you're not getting any sound from your Marantz Receiver, here are a few things to check: * Make sure all devices are properly connected. * Verify the speaker connections and configurations. * Ensure the audio device is powered on. * Adjust the master volume. * Cancel mute mode. * Check the connection with the playback device and select the correct input source. * Match the input mode to the assigned digital input terminal. * Also, remember that no sound will come from the speakers if headphones are connected, so disconnect them.
K
kevinyorkAug 21, 2025
What to do if Marantz Receiver power does not turn on?
- J
  Jenny BanksAug 21, 2025
  If your Marantz Receiver isn't powering on: * Make sure the power plug is fully and correctly inserted into the power outlet. * If the protection circuit is active, unplug the receiver from the outlet, wait 5-10 seconds, and then plug it back in.
A
aimee98Aug 23, 2025
Why is there no sound from the subwoofer on my Marantz Receiver?
- L
  Lori RiveraAug 25, 2025
  If you're not getting sound from your subwoofer with your Marantz Receiver: * Check the subwoofer connections. * Make sure the subwoofer is powered on. * In the menu, set “Speaker Config.” – “Subwoofer” to “Yes.” * Also, if “Front” and “Center” are set to “Large” in “Speaker Config.”, and “Subwoofer Mode” is set to “LFE”, the subwoofer might not output sound depending on the input signal or selected sound mode.
E
erica15Aug 26, 2025
Why does my Marantz Receiver automatically switch to standby mode?
- R
  Robert DownsAug 26, 2025
  Your Marantz Receiver might be automatically switching to standby mode because: * The sleep timer is active. You can turn the power back on or adjust the sleep timer settings. * The “Auto Standby” feature is enabled. This triggers when there's no activity for a certain period. To disable it, set “Auto Standby” to “Off” in the menu.
B
Brooke RamirezAug 27, 2025
What does it mean when the power indicator is blinking red every 0.5 seconds on my Marantz NR1504 Receiver?
- P
  Patrick WolfAug 27, 2025
  If the power indicator on your Marantz Receiver is blinking red every 0.5 seconds, it indicates that the protection circuit has been activated. This could be due to: * Using speakers that do not have the specified impedance. * Speaker cable core wires touching each other, a loose core wire from the terminal, or a core wire touching the rear panel. To resolve this, unplug the power cord, correct the wiring issues (re-twisting core wires or securing the terminal), and then reconnect the wire.
B
Brian HawkinsAug 29, 2025
Why can't I connect to my preset or favorite radio stations on my Marantz Receiver?
- E
  Eric WileyAug 29, 2025
  If you're unable to connect to your preset or favorite radio stations on your Marantz Receiver, it could be because the radio station is not currently broadcasting or is no longer in service. Try again later, but note that stations no longer in service cannot be connected to.
B
bowmanalbertAug 31, 2025
How to fix no video output with HDMI connection on Marantz NR1504 Receiver?
- S
  Suzanne RobinsonSep 1, 2025
  If you're not getting any video output via HDMI on your Marantz Receiver, try these steps: * First, check the HDMI cable connections to ensure they are secure. * Next, make sure the receiver's input source matches the HDMI connector you're using. * Finally, verify that your TV is compatible with HDCP (High-bandwidth Digital Content Protection). If it's not, the video may not display correctly.
T
Tammy FisherSep 2, 2025
How to fix no audio output with HDMI connection on Marantz Receiver?
- J
  Jennifer ScottSep 2, 2025
  If you're experiencing no audio output with an HDMI connection on your Marantz Receiver, here are some things to check: * Ensure that the HDMI connectors are properly connected. * If you want audio from the speakers, set “HDMI Audio Out” to “AVR” in the menu. * If you prefer audio from the TV, set “HDMI Audio Out” to “TV” in the menu.
A
Anthony EdwardsSep 4, 2025
Why no picture appears on my Marantz NR1504 Receiver?
- R
  Robert AndersonSep 4, 2025
  If you're not seeing a picture from your Marantz Receiver, verify the following: * Check the connection between the video output of the unit and the input of your TV. * Ensure the input settings on your TV match the input terminal connected to the receiver.
W
Wendy DanielsSep 6, 2025
Why the volume does not increase on Marantz NR1504?
- G
  George Mejia MDSep 6, 2025
  If the volume on your Marantz Receiver isn't increasing as expected: * The maximum volume might be set too low. Adjust the maximum volume using the “Limit” setting in the menu. * Also, check if the external devices connected to the receiver's output connectors are powered on.

Marantz NR1504 Specifications

General

Impedance	8 Ω
Receiver type	-
Audio output channels	5.1 channels
Total Harmonic Distortion (THD)	0.08 %
Power output per channel (1KHz@6 Ohm)	60 W
Power output per channel (20-20KHz@8 Ohm)	50 W
HDMI in	6
Composite video in	3
Digital audio optical in	1
Wi-Fi	No
Ethernet LAN	Yes
Supported radio bands	AM, FM
Product color	Black
Audio decoders	Dolby Digital Plus, Dolby TrueHD, DTS 96/24, DTS-ES, DTS-HD Master Audio
Apple docking compatibility	Not supported
Power consumption (standby)	0.2 W
Power consumption (typical)	180 W