Language
Set the language for display the menu on the TV screen.
English (Default) / Deutsch / Français / Italiano / Español / Nederlands /
Svenska / / Polski
%
•“Language” can also be set by the following procedure. However, the menu
screen is not displayed.
Following the display content to make the setting.
1. Press and hold the main unit’s PRESET CH + and STATUS for at least 3 seconds.
“V.Format:<PAL>” appears on the display.
2. Press the main unit’s DISPLAY.
“Lang.:<ENGLISH >” appears on the display.
3. Use the main unit’s PRESET CH +, – and set the language.
4. Press the main unit’s STATUS to complete the setting.
General
Make various other settings.
Auto Standby
Sets the time after which the unit automatically enters standby mode
when there are no audio or video signals input, and the unit is not operated.
Before it enters the standby mode, “Auto Standby” is displayed on the
display of this unit and the menu screen.
60 min : The unit goes into standby after 60 minutes.
30 min (Default) : The unit goes into standby after 30 minutes.
O : The unit does not go into standby automatically.
Front Display
Makes settings related to the display on this unit.
2 Display
Select the front display mode.
On (Default) : Display is always on.
Auto O : Display is o except when showing the status display.
O : Display is always o.
%
•This can also be set by pressing DISPLAY on the main unit.
To Next Page
Loading...
