TV Format
Set the video signal format to be output for the TV you are using.
2 Format
PAL (Default) : Select PAL output.
NTSC : Select NTSC output.
%
•“Format” can also be set by the following procedure. However, the menu
screen is not displayed.
1. Press and hold the main unit’s PRESET CH – and STATUS for at least 3
seconds.
“V.Format:<PAL>” appears on the display.
2. Use the main unit’s PRESET CH +, – and set the video signal format.
3. Press the main unit’s STATUS to complete the setting.
NOTE
•When a format other than the video format of the connected TV is set, the
picture will not be displayed properly.
To Next Page
Loading...
