M-DAX
Compressed audio formats such as MP3, WMA (Windows Media Audio)
and MPEG-4 AAC reduce the amount of data by eliminating signal
components that are hard for the human ear to hear. The “M-DAX”
function generates the signals eliminated upon compression, restoring the
sound to conditions near those of the original sound before compression.
It also restores the original bass characteristics for a rich and expanded
tonal range.
2 Mode
High : Optimized mode for compressed sources with very weak highs
(64 kbps and under).
Medium : Apply suitable bass and treble boost for all compressed
sources (96 kbps and under).
Low : Optimized mode for compressed sources with normal highs (96
kbps and over).
O (Default) : Do not use “M-DAX”.
%
•This item can be set with analog signals or PCM signal (Sample Rate =
44.1/48 kHz) is input.
•“M-DAX” settings are stored for each input source.
•This cannot be set when the sound mode is set to “DIRECT” or “PURE
DIRECT”.
•This can also be set by pressing M-DAX on the main unit.
•The M-DAX indicator lights.
Audio Delay
While viewing video, manually adjust the time to delay audio output so
that the video and audio are synchronized.
0ms (Default) – 200ms
%
•This item can be set within the range of 0 to 100 ms when “Auto Lip Sync”
(vpage 129) is set to “On” and when a TV compatible with Auto Lip Sync is
connected.
•Store “Audio Delay” for each input source.
Volume
Set the volume setting.
2 Scale
Set how volume is displayed.
0 – 98 (Default) : Display in the range 0 (Min) to 98.
–79.5dB – 18.0dB : Display ---dB (Min), in the range –79.5 dB to 18.0
dB.
To Next Page
Loading...
