What does it mean when the power indicator is blinking red every 2 seconds on my Marantz Receiver?
If the power indicator on your Marantz Receiver is blinking red every 2 seconds, the protection circuit is activated due to a temperature rise inside the unit. Turn off the power and allow the unit to cool down before reapplying power. Also, reinstall the unit in a location with better ventilation.
What to do if Marantz NR1504 does not operate properly?
If your Marantz Receiver isn't operating correctly, reset the microprocessor. Keep in mind that this will restore all settings to their factory defaults.
How to turn on display on Marantz Receiver?
If the display on your Marantz Receiver is off, go to the menu and set “Display” to something other than “Off.”
How to enable DTS sound output on Marantz NR1504 Receiver?
If DTS sound isn't being output on your Marantz Receiver, set “Decode Mode” in the menu to either “Auto” or “DTS.”
How to output Dolby TrueHD, DTS-HD, Dolby Digital Plus audio on Marantz NR1504 Receiver?
To output Dolby TrueHD, DTS-HD, and Dolby Digital Plus audio on your Marantz Receiver, use HDMI connections.
Overview of front panel controls and indicators.
How to connect speakers to the unit for audio output.
Connecting the unit to a television for video and audio output.
Setting up network connectivity for online features.
Instructions for playing music from an iPod via USB.
How to tune into and listen to FM radio stations.
Choosing different audio playback modes for surround sound.
Guides through initial installation and setup process.
Adjusting audio output levels and sound field parameters.
Settings for HDMI video/audio output and related functions.
Performing settings related to input source playback.
Solutions for common operational problems and error messages.
Adjusting volume levels automatically for different content types.
Explanation of HDMI interface and its capabilities.
Details on audio formats compatible with the unit.
Instructions and compatibility for USB memory devices.
General| Impedance | 8 Ω |
|---|---|
| Receiver type | - |
| Audio output channels | 5.1 channels |
| Total Harmonic Distortion (THD) | 0.08 % |
| Power output per channel (1KHz@6 Ohm) | 60 W |
| Power output per channel (20-20KHz@8 Ohm) | 50 W |
| HDMI in | 6 |
| Composite video in | 3 |
| Digital audio optical in | 1 |
| Wi-Fi | No |
| Ethernet LAN | Yes |
| Supported radio bands | AM, FM |
| Product color | Black |
| Audio decoders | Dolby Digital Plus, Dolby TrueHD, DTS 96/24, DTS-ES, DTS-HD Master Audio |
| Apple docking compatibility | Not supported |
| Power consumption (standby) | 0.2 W |
| Power consumption (typical) | 180 W |
Weight and Dimensions| Depth | 367 mm |
|---|---|
| Width | 440 mm |
| Height | 105 mm |
| Weight | 8200 g |
To Next Page