Marantz NR1200 - Page 19

.
q
erw
q
t
A
Bluetooth/wireless LAN antenna connectors
Used to connect the included external antennas for Bluetooth/wireless
connectivity when connecting to a network via wireless LAN, or when
connecting to a handheld device via Bluetooth. (v p. 43)
A
Place the external antennas for Bluetooth/wireless connectivity
evenly over the screw terminal of rear.
B
Turn clockwise until the antennas is fully connected.
C
Rotate the antenna upwards for best reception.
.
qwe
B
FLASHER IN jack
Used when using a control BOX or other such control devices to control
this unit.
C
Digital audio connectors (DIGITAL AUDIO)
Used to connect devices equipped with digital audio connectors.
0
“Connection 2 : TV equipped with an HDMI connector and
incompatible with the ARC (Audio Return Channel)” (v p. 34)
D
NETWORK connector
Used to connect to a LAN cable when connecting to a wired LAN
network. (v p. 42)
E
HDMI connectors
Used to connect devices equipped with HDMI connectors.
0
“Connection 1 : TV equipped with an HDMI connector and
compatible with the ARC (Audio Return Channel)” (v p. 33)
0
“Connection 2 : TV equipped with an HDMI connector and
incompatible with the ARC (Audio Return Channel)” (v p. 34)
0
“Connecting a set-top box (Satellite tuner/cable TV)” (v p. 36)
0
“Connecting a DVD player or Blu-ray Disc player” (v p. 37)
Contents Connections Playback Settings Tips Appendix
19
Front panel Display Rear panel Remote Index