Marantz SR4600 Service Manual (English)

Other manuals for Marantz SR4600

Service Manual75 pages

Specifications2 pages

Questions and Answers:

A
abigail40Aug 21, 2025
How to fix Marantz Receiver remote control if it fails?
- C
  Cindy HaleAug 22, 2025
  If the remote control unit fails to control the receiver, consider these potential causes: * Replace all the batteries with new ones. * Select a different position from which equipment will be controlled because the remote controller's function-key setting might be wrong. * Move closer to the receiver if the distance is too far. * Remove any object blocking the path between the receiver and the remote commander.
A
Andrea ElliottAug 23, 2025
What to do if there is no sound and picture output even when power is on Marantz Receiver?
- C
  Charlotte JohnsonAug 23, 2025
  If there is no sound and picture even when the power is on, check the following: * Ensure that mute is off by using the remote control. * Verify that the input cable is connected correctly, referring to the connection diagram. * Adjust the master volume, as it might be turned all the way down. * Confirm that the function selector is in the correct position.
T
Tammy DavisAug 25, 2025
Why is there no output to Sub Woofer Out on my Marantz SR4600?
- J
  Jasmin ShepherdAug 25, 2025
  If there is no output to the Sub Woofer Out, it may be because 'Sub-woofer = NONE' has been selected in SETUP mode. To resolve this, select 'Sub-woofer = YES'.
C
Charles EvansAug 27, 2025
What to do if FM or AM reception fails on Marantz SR4600 Receiver?
- S
  Scott WilsonAug 27, 2025
  If FM or AM reception fails, ensure that the indoor FM and AM antennas are correctly connected to the FM and AM antenna outlets.
H
Harry HarveyAug 27, 2025
Why is there no audio output from the center channel speaker on my Marantz SR4600?
- M
  Mike ReyesAug 27, 2025
  If there is no audio output from the center channel speaker, check the following: * Ensure the center speaker cable is correctly connected. * If 'STEREO' is selected for Surround mode, no sound will be output from the center speaker; set another Surround mode. * Verify that 'Center = NONE' has not been selected in SETUP mode; make the correct setting.
B
Brooke DeanAug 29, 2025
Why is there no audio output from the surround speakers on my Marantz SR4600 Receiver?
- J
  Justin GonzalesAug 29, 2025
  If there is no audio output from the surround speakers, check these potential issues: * Ensure the surround speaker cable is correctly connected. * If 'STEREO' is selected for Surround mode, no sound will be output from the surround speaker; set another Surround mode. * Verify that 'Surround = NONE' has not been selected in SETUP mode; make the correct setting.
A
Amy BullockAug 30, 2025
Why is there no audio output from the surround back speakers on my Marantz Receiver?
- M
  monica85Aug 30, 2025
  If there is no audio output from the surround back speakers, consider the following: * Ensure the surround back speaker cable is correctly connected. * If the surround mode is not EX/ES mode, set it to EX/ES. * Verify that 'Surround back = NONE' has not been selected in SPEAKERS SIZE SETUP; make the correct setting.
M
Michael HutchinsonSep 1, 2025
What to do if I cannot select EX/ES mode on my Marantz Receiver?
- C
  Candice SolomonSep 1, 2025
  If you cannot select EX/ES mode, it might be due to the following reasons: * 'Surround center= NONE' has been selected in SPEAKERS SIZE SETUP. Make the correct setting. * The input signal is incompatible. Use a 5.1channel source.
W
William CarpenterSep 2, 2025
Why is noise heard during AM reception on my Marantz SR4600?
- Z
  zwaltersSep 2, 2025
  If noise is heard during AM reception, it may be affected by other electrical fields. Try changing the location where the AM indoor antenna is set up.
H
hughesstephenSep 4, 2025
Why is noise heard during FM reception on my Marantz SR4600 Receiver?
- S
  swilliamsSep 4, 2025
  If noise is heard during FM reception, the radio waves from the broadcasting station may be weak. Consider installing an FM outdoor antenna.

Marantz SR4600 Specifications

General

Type	AV Receiver
Number of Channels	6.1
Total Harmonic Distortion (THD)	0.08%
Input Sensitivity	200 mV
HDMI	No
Component Video Inputs	3
Surround Sound Formats	Dolby Digital, DTS, Dolby Pro Logic II
Input Impedance	47 kOhms
Signal-to-Noise Ratio	100dB
Digital Audio Inputs	2 Optical, 2 Coaxial
Tuner Section	AM/FM
Video Section	Composite, S-Video