Marantz SR6010 - Page 217

5.1ch + ZONE2
(Default):
0
Setting to assign the power amplifiers
in this unit for ZONE2 to 2-channels.
5.1ch (Bi-Amp) :
0
Setting to assign the power amplifiers
in this unit for front speaker bi-amp
connection to 2-channels.
7.1ch/2ch Front :
0
Setting to assign the power amplifiers
in this unit for connecting 2-channel
playback speakers to 2-channels.
0
You can switch the front speakers
when using 2-channel playback in
direct mode or stereo mode, or when
using multi-channel surround
playback.
5.1ch + Front B :
0
Setting to assign the power amplifiers
within this unit for connecting the
second set of front speakers.
0
You can switch between the desired
combination of front speakers A and
front speakers B.
Switch the front speaker using the “Front
Speaker” setting. (v p. 231)
o
Floor
n
Layout
Select the floor speakers location.
5ch & SB & FW
z
1：
This layout combines a surround back or
front wide speaker with the basic 5-
channel layout.
5ch & SB
z
2
(Default)：
This layout combines a surround back
speaker with the basic 5-channel layout.
5ch & FW
z
1：
This layout combines a front wide
speaker with the basic 5-channel layout.
5ch
z
2：
This is a basic 5-channel layout that uses
front speakers, center speakers and
surround speakers.
z1
This can be selected when “Assign Mode” is set to “9.1ch” or “7.1ch” in the
menu. (v
p. 216)
z2
This can be selected when “Assign Mode” is set to “9.1ch”, “7.1ch” or
“7.1ch/2ch Front” in the menu. (v
p. 216)
Contents
Connections Playback Settings Tips Appendix
217
Front panel Display Rear panel Remote Index