3-3.1. Actions
This mode enables the unit to display the accumulated operating time, power On count and each pro-
tection count.
3-3.2. Starting up
While holding down buttons "
ZONE2 SOURCE
" and "
STATUS
" simultaneously, press the power button
to turn on the power.
Select the "
4. OP INFO
" using the "
TUNER PRESET CH+ / -
" button, then press the "
STATUS
" button
to conî™°rm.
3-3.3. Operations
Press the "
STATUS
" button after starting up this device in Operation Info mode.
The following information is displayed in the following order.
(a) Accumulated operating time
L1
Operate
L2
Time:
L3
______H
↑ Time display
"
STATUS
"
(b) Power On count
L1
Power On
L2
Time:
L3
______
↑ Count display
"
STATUS
"
(c) DC / ASO Protection count
L1
Protect
L2
DC :___
L3
ASO:___
"
STATUS
"
(d) Thermal Protection (E) count
L1
Protect
L2
TH E:___
L3
"
STATUS
"
(e) Current Protection count
L1
Protect
L2
CURRENT:
L3
___
"
STATUS
"
(Returns to normal display)
3-4. Operation Info Mode
141
Caution in
servicing
Electrical Mechanical Repair Information Updating
To Next Page
Loading...
