3
Use o p to select picture mode.
Off: No picture quality adjustment is done with this unit.
Standard:
The standard mode suited for most living room
viewing environments.
Movie:
A mode suited for watching movies in a dark room
such as a theater room.
Vivid:
A mode that makes graphic images for games, etc.
brighter and more vivid.
Streaming: A mode suited for low bit rate video sources.
ISF Day:
A mode suited for watching movies in a bright room
during the day.
ISF Night:
A mode suited for watching movies in a dark room at
night.
Custom: Adjusts the picture quality manually.
4
Press ENTER.
“Picture Mode” settings are stored for each input source.
Playing the same music in all zones (All
Zone Stereo)
You can play back the music being played back in MAIN ZONE
simultaneously in ZONE2 and ZONE3 (other rooms).
It is useful when you want to enjoy the same music at the same time in
multiple rooms during home party or when you want to play back the same
BGM in the entire house.
1
Press OPTION.
The option menu screen is displayed.
2
Use ui
to select “All Zone Stereo”, then press ENTER.
3
Select “Start”, then press ENTER.
0
The input sources for ZONE2 and ZONE3 are switched to the
same input source as for MAIN ZONE, and playback starts in the
All Zone Stereo mode.
0
When you do not want ZONE2 or ZONE3 to participate in All
Zone Stereo, press ENTER to clear the check mark and then
press “Start”.
Contents Connections Playback Settings Tips Appendix
147
Front panel Display Rear panel Remote Index
To Next Page
Loading...
