General
Make various other settings.
Language
Set the language for display the menu on the TV screen.
English / Français / Español (Default : English)
“Language” can also be set up by the following operation. However, the menu screen
is not displayed. Watch the display while configuring the settings.
1.
Press and hold the main unit’s STATUS and ZONE SELECT at the
same time for at least 3 seconds.
“Video Format <NTSC>” appears on the display.
2.
Press the main unit’s i.
“GUI Language ENGLISH” appears on the display.
3.
Use the main unit’s o or p and set the language.
4.
Press the main unit’s ENTER to complete the setting.
ECO
Configure the settings of the ECO Mode and auto standby mode.
o
ECO Mode
This mode can reduce the power consumption when the power of the
unit is on.
On: Reduce the power consumption.
Auto:
The power consumption is automatically
reduced to match the volume.
Off
(Default):
Do not reduce the power consumption.
0
When you want to output audio at a high volume level, it is recommended to
set “ECO Mode” to “Off”.
0
Eco mode can also be switched by pressing ECO G on the remote control
unit.
Contents Connections Playback Settings Tips Appendix
266
Front panel Display Rear panel Remote Index
To Next Page
Loading...
