Zone Rename
Change the display title of each zone to one you prefer.
MAIN ZONE / ZONE2 / ZONE3
Set Defaults: The default setting is restored for the edited zone name.
Up to 10 characters can be input.
For character input, see
“Using the keyboard screen” (v
p. 188).
Smart Select Names
Change the smart select name that appears on the TV screen to one you
prefer.
Smart Select 1 / Smart Select 2 / Smart Select 3 / Smart Select 4
Set Defaults:
The default setting is restored for the edited smart select
name.
Up to 16 characters can be input.
For character input, see
“Using the keyboard screen” (v
p. 188).
Trigger Out 1 / Trigger Out 2
Select the conditions for activating trigger out.
For details about how to connect the DC OUT jacks, see
“DC OUT
jacks” (v
p. 83).
n
When setting for zone (MAIN ZONE / ZONE2 /
ZONE3)
Trigger out is activated through linkage to the power of the zone set to
“On”.
n
When setting for input source
Activates trigger out when the input source set to “On” is selected.
n
When setting for HDMI monitor
Activates trigger out when the HDMI monitor set to “On” is selected.
On: Activate trigger on this mode.
– – –: Do not activate trigger on this mode.
Contents Connections Playback Settings Tips Appendix
270
Front panel Display Rear panel Remote Index
To Next Page
Loading...
