Playback the source in ZONE2
o
Playing the same source simultaneously in MAIN ZONE and ZONE2 (TV Audio Sharing setting)
X
Z2
MAIN
Input source
select buttons
By setting the ZONE2 input source to “Source” in the TV Audio sharing
settings of this unit, you can play audio input from a TV via ARC or from a
playback device in the MAIN ZONE while enjoying the same content in
ZONE2.
1
Press MAIN to set the operating zone to MAIN ZONE
with the remote control.
The MAIN indicator lights.
2
Press the input source select button to select the input
source to be played.
The audio signal of the selected source is output to MAIN ZONE.
3
Press Z2 to set the operating zone to ZONE2 with the
remote control.
The Z2 indicator lights.
4
Press POWER X to turn on the ZONE2 power.
The ZONE2 power indicator on the display lights.
Contents
Connections Playback Settings Tips Appendix
125
Front panel Display Rear panel Remote Index
To Next Page
