Marantz UD9004/U1B - Points of Greasing

134
UD9004
POINTS OF GREASING
Greasing position
Grease : EM30L (2.0mg)
Grease : EM30L
Only shaft area of gear axis
(Not apply belt and pulley)
(2.0mg each x 2)
Grease : EM30L
CAM SPRING top
(SLIDE CAM contact area)
(0.9mg)
Grease : EM30L
SLIDE CAM (Upper convex, Top)
(2.0mg each x 2)
Grease : EM30L
MECHA BASE back
CAM SPRING attachment area(0.9mg)
HANARL UD-321 RED
TRAY bottom (Groove, Convex)
(0.5mg)
Grease : EM30L
SLIDE SHAFT
Move HOUSING forward
and apply it to the backward
all area. (17.0mg)
Greasing position
Greasing position
Greasing position
Greasing position
Greasing position
Greasing position
Greasing position
Greasing position
Greasing position
Greasing position
Grease : EM30L
Only around the gearX
(Not apply pulley)
(0.7mg)
HANARL UD-321 RED
Shaft all area
(0.2mg)
Grease : EM30L
Shaft (2.0mg)
Grease : EM30L
Both ends side of boss contact
area under MECA BASE-SLIDE CAM.
(7.0mg each x 2)
Grease : EM30L
Only shaft area of gear axis
(2.0mg each x 2)
Grease : EM30L
SPRING PLATE-STEEL BALL contact area
(0.9mg)
HANARL UD-321 RED
Only gear contact area
(Not apply belt and pulley)
(0.7mg)
Grease : EM30L
Boss all area
(2.0mg each X 4)
HANARL UD-321 RED
Shaft all area
(0.2mg)