Marantz UD9004/U1B - Page 22

20
UD9004
3. µcom firm check mode
3.1. Preparation
(1) Equipment used: None
(2) Unit setting: No spec other than the following procedure.
3.2. Procedure
b System µcom and other µcom firm check mode.
This mode is for displaying the status of each µcom employed.
(1) Pressing the 5 and 1 buttons simultaneously, plug the AC cord into a power outlet.
(2) "NO DISC" is displayed on the fluorescent tube.
(3) Press remote contraller “3265”.
(4) Each time the POP UP MENU button or Cursor buttons(d or f) on the remote control unit is pressed, µcom firm is
displayed one after another.
Ex.: [Sys Ver000103, Sys Day090219, Sys GEN100000………]
4. Traylockmode
4.1. Preparation
(1) Equipment used: None
(2) Unit setting: No spec other than the following procedure.
4.2. Procedure
【Setting】
(1) Pressing the 1 and 3 buttons for simultaneously, plug the AC cord into a power outlet.
(2) "TRAY LOCK" is displayed on the fluorescent tube.
【Cancel】
(1) Unplug the UD9004's AC cord from the power outlet.
(2) Pressing the 1 and 3 buttons simultaneously, plug the AC cord into a power outlet.
(3) "PLEASE WAIT" is displayed on the fluorescent tube and tray opening/closing is enabled.
b The tray lock mode is also canceled when the product is initialized.