12
OTHER CAUTIONS
• When you insert SD card into the device, check card directions carefully.
• Carefully remove SD card from the device, so that it may not stick out so far from you.
• Do not remove SD card suddenly while the device is still working.
It may cause recognition problems of SD card or SD card will be damaged.
• When upgrading the firmware, do not remove SD card and keep the power is connected well.
Or else it may cause the device damage.
• Keep the window is clean and mount holder fixed firmly, as it may become detached while driving.
Do not use the same adhesive tape several times for fixing mount holder, it may detach from windows
and cause an accidents.
• Before connecting the hardwire power cable, read the power cable hardwiring manual firstly.
If you connect it in a wrong way, it may cause the device damage.
To Next Page
Loading...
