What to do if my Marbella Dash Cameras is unable to record videos?
If your Marbella Dash Camera is not recording videos, first check the memory card’s available space and delete files if necessary. If loop recording is enabled, the memory card might be corrupted; in this case, reformat the memory card. If the issue continues, replace it with a new one.
What to do if I encounter a file error when trying to playback pictures or videos on my Marbella Dash Cameras?
If you encounter a 'file error' when trying to playback pictures or videos on your Marbella Dash Cameras, it may be because the MicroSD card is corrupted or has bad sectors. To resolve this, reformat the memory card.
Why are captured images not stored on my Marbella Dash Cameras?
If your Marbella Dash Cameras' captured images are not being stored, it could be due to a full or malfunctioning MicroSD card. Try reformatting the card or replacing it with a new one. Also, ensure you stop recording before shutting down the device to save the image.
What to do if Marbella Dash Cameras auto stop recording in video mode?
If your Marbella Dash Cameras automatically stops recording in video mode, you should get a microSD card that has a minimum 8GB Class 10 speed.
Why does the screen auto power-off on my Marbella Dash Cameras?
If the screen of your Marbella Dash Cameras automatically powers off, it might be due to the screen saver function being enabled or low battery. To disable the screen saver, press the UP button. If the battery is low, charge it.
Why are there horizontal stripes interference on the image of my Marbella Dash Cameras?
If you are seeing horizontal stripes interference on the image of your Marbella Dash Cameras, this could be due to a wrong light frequency setting. Please adjust the setting according to your local power supply: use 50Hz or 60Hz. For Singapore/Malaysia, use 50Hz.
Why are the images from my Marbella Dash Cameras hazy?
If the images from your Marbella Dash Cameras appear hazy, the lens might be dirty. Check for fingerprints or dust on the lens and clean it with a micro fabric cloth if necessary.
What to do if my Marbella Dash Cameras device cannot be turned on?
If your Marbella Dash Cameras cannot be turned on, the battery might be low. Charge the battery.
Use approved accessories, handle with care, avoid damage, and protect from extreme conditions.
Avoid interference, smoke, unsafe driving; react immediately to malfunctions like smoke or leaks.
Guidelines for device handling, storage conditions, and maintaining battery and charger life.
Provides instructions for responsible disposal and recycling of the product and its accessories.
Lists the standard items included in the product box, such as the camera, manual, charger, and remote.
Provides instructions for fixing the camera to the mount and connecting the charger.
Covers app installation, Wi-Fi setup, interface, device settings, and operational modes like video/photo recording.
Provides solutions for common problems like image storage, device power, recording errors, and hazy images.
General| Frame Rate | 30 fps |
|---|---|
| Display | LCD |
| G-Sensor | Yes |
| Loop Recording | Yes |
| Night Vision | Yes |
| Motion Detection | Yes |
| Display Size | 2.0 inches |
| Video Resolution | 1920x1080 |
| Memory Card Slot | MicroSD |
| Storage | MicroSD card |
| Battery | Built-in |
To Next Page
