28
© 2018
Ma
k
a
T
e
c
hnologie
s
G
roup
. A
ll Righ
ts
Re
s
er
v
ed
.
Getting
Started
Operation
of your TX2mini
F
HD
Digital
Roadcorder
TM
3. Select the G-sensor prefer accordingly (default is set as Low)
4. Press confirm to activate changes and exit this selection.
5. Go back to the live view and press record to start recording.
6. Make sure the recording icon on the top right hand is blinking before exit
the apps.
7.Record Duration
This function enable to you set the Time interval (loop recording) of the
video clip recording per file. Selection of (off/min/2min/3min/5min/10min) as
per to user preference. Default of 3min is set for common and best recording
time.
1. When in the setting, press on the arrow sign to go into the function Record
Duration
2. You will see the screen as shown below:
3. Select the duration prefer accordingly (default is set as 3min). If duration is
set to Off, overwriting of the video will not happen when memory used up.
4. Press confirm to activate changes and exit this selection.
5. Go back to the live view and press record to start recording.
6. Make sure the recording icon on the top right hand is blinking before exit
the apps.
To Next Page
Loading...
