Marbella TX2 Mini - Time Watermark; Format Card

31
© 2018 Ma k a T e c hnologie s G roup . A ll Righ ts Re s er v ed .
Getting Started
Operation of your TX2mini F HD Digital Roadcorder
TM
1. When in the setting, go to the selection icon on the function Motion Detect.
2. Press once on the icon to on or to off
3. Go back to the live view and press record to start recording.
4. Make sure the recording icon on the top right hand is blinking before exit
the apps.
Note : this function advisable not to turn on if you not recordingly in 24hrs
operation.
12.Time Watermark
This function enables you to stamp the date/time on the video footage once the
function is trigger. It is always advisable to turn the watermark on in order to
stamp the information on the clip. (Default in On mode)
1. When in the setting, go to the selection icon on the function Time
Watermark.
2. Press once on the icon to on or to off
3. Go back to the live view and press record to start recording.
4. Make sure the recording icon on the top right hand is blinking before exit
the apps.
13.Format Card
This function enable you to format the card without formatting thru the PC. It is
advisable to format the card once every 2 week to keep the card clean and not
getting corrupt easily.
1. When in the setting, press on the arrow sign to go into the function Format
Card