Need help?Do you have a question about the Marbella KR5 and is the answer not in the manual?
General| Video Resolution | 1920x1080 |
|---|---|
| Viewing Angle | 170 degrees |
| Memory Card Support | MicroSD up to 32GB |
| Field of View | 170 degrees |
| GPS | No |
| G-Sensor | Yes |
| Loop Recording | Yes |
| Night Vision | Yes |
| Storage | MicroSD, up to 32GB |
Read this manual for proper use and firmware update notices.
Device records driving process; use as reference for checking video.
Each product has a unique serial number printed on a sticker.
Device has a high sensitive MIC for recording video and voice simultaneously.
Voice guide during booting/recording; LED indicators for status.
Indicates device operation and flashes for motion detection in parking mode.
Device uses RTC; GPS sets real time if connected.
Speaker provides event beep sounds and voice guidance during operation.
Instructions for fixing mount holder and rear camera.
Safety warnings to prevent property damage during use.
Instructions for proper use, especially regarding SD card handling and formatting.
Precautions for SD card, firmware upgrade, and mounting.
Labels front parts like lens, speaker, security LED, and mounting surface.
Labels LCD screen, MIC, REC LED, and power switch.
Labels power in, GPS port, SD card slot, and rear camera port.
Labels rear camera parts: lens, angle adjustor, security LED, and cable.
Steps for inserting SD card, mounting, and connecting the front camera.
Steps for mounting and connecting the rear camera, including cable management.
Steps to connect power cable by hardwiring, identifying fuse box and connections.
Diagram of hardwire power cable (BATT, ACC, GND) and plug info.
Explains driving, event, parking, and photo capture recording types.
Automatic recording when ignition is on until ignition is off.
Format of recording files, including index, date, time, and recording type.
Full SD card deletes oldest files to create new ones.
G-sensor triggers event mode, recording 10s before and after impact.
Current recordings saved; parking mode for hardwiring, stops for ACC.
Do not remove SD card during operation to prevent damage or data loss.
Check power, SD card, or contact service if files are missing.
Troubleshooting for power, SD card, or unit problems.
Detects impacts via G-sensor, records before/after event.
Event files record 10 seconds before and 10 seconds after an impact (max 20s).
Format of event recording files, similar to driving records but with 'E' type.
Full SD card deletes oldest files to create new ones.
G-sensor detects sudden movements (forward/backward, left/right) as impacts.
Recording behavior when engine off: continues with hardwiring, stops with cigar power.
Files may be unsaved due to SD card or power issues; contact service.
Parking mode activates with hardwiring; starts on impact or movement.
Parking files record up to 10s for impact, 1min for movement.
Format of parking recording files, similar to others but with 'P' type.
Full SD card deletes oldest files to create new ones.
Activated by hardwiring; records movement (1min) or impact (10s).
Device supports auto-off and low battery detection to prevent drainage.
LED lamp blinks when a movement is detected.
Instructions for capturing still images during driving.
Photo files are named with 'A' for front and 'B' for rear.
Captures front and rear images, saved as JPG files.
How the device turns on and enters recording mode.
Description of the display interface elements.
Details status bar, playback, photo capture, voice recording, and settings icons.
Shows 1-channel full screen or 2-channel front/rear display.
Turns off the screen automatically or manually.
Illustrates how to display or hide the menu bar.
How to play, select, and pause recorded video files.
Choose files from Driving, Event, Parking, or Photo folders to play.
During playback, touch screen to display menu buttons.
Pausing playback stops recording.
Details playback controls, file list management, and screen options.
Controls for speed, play/pause, navigation, capture, save, and settings.
Adjust video resolution, volume, impact sensitivity, voice recording, and brightness.
Configure white balance, contrast, exposure, and date/time.
Configure event alarm, parking sensor, speed display, and parking REC time.
Set time zone, voice guidance, SD partition, and touch calibration.
Manage WiFi, factory reset, and view system information.
Set device date/time and configure power cut-off for battery protection.
Format SD card and manage WiFi connection (ON/OFF).
Guide to download and initiate the PC viewer installation.
Steps for choosing location and finishing the PC viewer installation wizard.
Explains the main screen elements: video, file list, map, and controls.
Controls for speed, play/pause, navigation, capture, save, and settings.
Displays G-sensor values and current speed during playback.
Displays recording location if GPS data is available.
Details video display options like F/R convert, L/R reverse, and upside down.
Shows playback progress and allows speed control.
Visualizes G-sensor data graphically.
How to select files by time/folder and view locations on map.
Expands display to full screen and allows different list views.
Controls for speed, play/pause, navigation, capture, save, and settings.
Displays the PC viewer software version information.
Select different categories for settings adjustments.
Adjusting values for various settings like resolution, volume, and brightness.
Saves new settings to SD card or cancels changes.
View TAT files using bundled viewer or install TAT browser.
Interface for viewing and managing TAT files, with conversion options.
Convert TAT files to AVI format for playback on public players.
Steps to download, store on SD card, and update firmware.
Important steps during update: engine on, power connected, file location.
Addresses video/voice recording, power, file copying, and screen problems.
Addresses map display, rear camera, and image quality problems.
To Next Page
