Marbella TX2 - Setting; Camera Name; Camera Password Change; Auto Recording

30
© 2017 Ma k a T e c hnologie s G roup . A ll Righ ts Re s er v ed .
Getting Started
Operation of your TX2 F HD Digital Roadcorder
TM
13.Setting
This function enable to you change the camera name/password and other
available function require for the setting up. All default setting is base on
best requirement needs.
i. Camera Name
This function enable to you change the camera wifi name when
you first log in.
ii. Camera Password Change
This function enable to you change the camera wifi password after
your first log in. All password change please change to 8
alphanumeric or numerical.
iii. Auto Recording
This function enable to you change the camera recording mode
(Auto-recording on/off) when booting up the device
iv. Video Quality
This function enable to you change the camera Video Quality
(FHD, HD, etc) mode according to your preference. Default
resolution is set at Full HD.
v. Format
This function enable you to format the card without formatting thru the
PC. It is advisable to format the card once every 2 week to keep the
card clean and not getting corrupt easily.