4-15
Nº502 Media Console Troubleshooting & Maintenance
Care & Maintenance
The Nº502 requires routine care and maintenance to ensure optimal
performance. The bulleted items indicate maintenance procedures
that should be performed on a regular basis.
Note Failure to perform the maintenance procedures included in this section
may void the manufacturer’s warranty and/or standard repair policies.
• To remove dust from the Nº502 exterior surface, use a feather
duster or a low-pressure blower.
• To remove dirt and fingerprints from the Nº502 exterior surface,
use a soft, lint-free cloth. DO NOT use metal polish or a cloth
made with steel wool.
If needed, this cloth can be dampened with isopropyl alcohol.
DO NOT dampen the cloth with Benzene, acetone-based
cleaners, or other commercial cleaners.
Wipe the Nº502 exterior surface in the same direction as the grain
of the brushed aluminum.
Caution! DO NOT apply liquid directly to the N
o
502 exterior surface. Doing
so may damage electrical components.
• Replace the remote control batteries as needed.
Refer to Chapter 1: Getting Started for instructions on how to
replace the remote control batteries.
To Next Page
Loading...