3-41
Nº502 Media Console Customizing the Nº502
External Control
External control commands can be received over both the ethernet and
RS-232 ports. The external control parameter identifies which port is
being used by the external controller.
Lock Options
The Lock Options menu allows you to lock certain setup features and
customized parameters so that they may not be changed. Each of the
parameters in the Lock Options menu can be Locked or Unlocked.
To access the Lock Options menu, press the Setup button and select the
Lock Options menu.
Access to the Lock Options menu can never be locked. So even if the
Setup menu is Locked, the Lock Options menu can be accessed in order to
Unlock the Setup menu.
Restore Options
The Restore Options menu provides access to the Restore Factory Settings
parameter, which restores all parameter settings to the factory defaults.
Restoring the factory settings of the Nº502 erases all currently customized
settings, calibration values, and setup parameters. Once the factory
settings have been restored, all other values are permanently deleted.
Before performing this function, make sure that you’ve saved the Nº502
configuration settings. We’ve provided a configuration tool to make this
easier to accomplish. The Nº502 can download your configuration
settings to a file on the hard drive of a computer, via the Ethernet port on
the rear panel of the Nº502. For more information regarding how to save
your configuration, refer to the “Restoring Factory Default Settings”
section of Chapter 4: Troubleshooting and Maintenance.
When Restore Options is selected, a warning message is displayed. If
you’re sure you want to restore the factory defaults, select Restore and
press the Enter button. Otherwise, select Cancel and press the Enter
button to exit out of the menu without restoring the factory defaults.
Note All parameter default settings are identified in the Menu Trees, which can be
found in the Appendix.
Triggers
The Nº502 provides four trigger outputs that can be used to control other
products, such as amplifiers, lights, shades, and video screens. The triggers
-UserOptions-LockOptions
Surround Modes
Audio Adjust
Setup
To Next Page
Loading...