Mark Levinson 502 - Page 108

A-2
Appendix Mark Levinson
Outputs
HDMI Two HDMI Type A, Version 1.1, 19-pin connectors
Analog Video • One component with three BNC connectors (Y, Pb, Pr)
• One composite monitor, RCA connector
Analog Audio • One unbalanced 7.4-channel array, RCA connectors
• One balanced 7.4-channel array, XLR connectors
Remote Zone One unbalanced stereo pair, RCA connectors
HDMI Formats
HDMI Input Video: 480/576i, 480/576p, 720p, 1080i, 1080p
Audio: Dolby Digital, DTS, and PCM (32, 44.1, 48, 88.2, 96, 176.4, and
192kHz)
HDMI Output Video: 480/576i, 480/576p, 720p, 1080i, 1080p
Audio: Dolby Digital, DTS, and PCM (32, 44.1, 48, 88.2, 96, 176.4, and
192kHz)
Component Video
Performance
Compatibility 480/576i, 480/576p, 720p, 1080i
A/D Conversion 12-bit, 110MHz (4x SD, 2x ED, 1x HD oversampling)
D/A Conversion 14-bit, oversampling to 216MHz
Input/Output Levels Y: 1.0V
p-p
with 75Ω load (700mV
p-p
video)
Pb/Pr: +/–350mV with 75Ω load (700mV
p-p
)
S-Video and
Composite Video
Performance
Compatibility NTSC/PAL
A/D Conversion 12-bit, 110MHz (4x SD, 2x ED, 1x HD oversampling)
Composite Input Level 1.0V
p-p
with 75Ω load
S-Video Input Level Y (Luma): 1.0V
p-p
with 75Ω load (700mV
p-p
video)
C (Chroma): 300mV
p-p
with 75Ω load
Composite Monitor
Output Level
1.0V
p-p
with 75Ω load