3-53
Nº502 Media Console Customizing the Nº502
Downmix
The Downmix mode modifies a multi-channel signal, transforming it into
a 2-channel signal. The downmixed reproduction of the input signal is
sent to only the front left and right speakers.
2-Channel
The 2-channel Surround modes are provided for 2-channel input signals.
Stereo Surround
This mode is designed for the playback of stereo sources. The mode sends
the left channel to the Front, Surround, and Back Left channels and the
right channel to the Front, Surround, and Back Right channels. The
Center channel is a sum of the Left and Right channels. We recommend
using this mode for background music.
This mode has no adjustable parameters.
Stereo
The Stereo mode turns off all processing to present pure front left and
right channel stereo programs. Bass management remains active to route
the low frequencies to the subwoofers.
This mode has no adjustable parameters.
Mono
The Mono modes are designed for use with monophonic recordings,
although today, the only truly “mono” digital signal that still exists is
Dolby Digital 1.0, a mono version of Dolby Digital. These are most
commonly used for watching old movies that were originally released
with mono soundtracks, such as The Wizard of Oz or Casablanca.
Mono Logic
The Mono Logic mode, designed for the playback of mono sources, uses
proprietary reverb algorithms to realistically expand the mono sources to
Parameter Default Setting Possible Settings
Surround Mix
0dB –5dB to +5dB
Master Level
0dB –5.0dB to +5.0dB
Compare
Default Default, Custom
To Next Page
Loading...