3-58
Customizing the Nº502 Mark Levinson
Surround Mix
The Surround Mix parameter controls the relative level of the surround
channel information sent to the audio output connectors labeled Front.
We recommend setting this parameter to +2dB or +3dB for all input
sources. This parameter is available in the Downmix mode.
Surround Roll-Off
The Surround Roll-Off parameter applies high-frequency attenuation
control to the audio output connectors labeled Surround and Back. This
filter is only applied to output signals generated by the Nº502. This
parameter is available in all Logic 7 modes and the Mono Logic mode.
Vocal Enhance
The Vocal Enhance parameter controls the level of dialogue boost in the
audio output connector labeled Center. Increase this setting to improve
dialogue intelligibility, especially for lower volume levels. This parameter
is available in all Logic 7 modes.
To Next Page
Loading...