Mark Levinson 502 - Page 90

3-60
Customizing the Nº502 Mark Levinson
upper-case letters; when Cap is visible, then lower-case letters are
displayed.
• Delete – deletes the highlighted character on the Name Line.
• Clear – clears all of the characters on the Name Line.
• Cancel – exits the Name Selector without saving any changes.
• Save – saves the name displayed on the Name Line and exits the
Name Selector.
Note A blank name cannot be saved. The Name Line must contain at least one
character in order to save the name.
Using the Name Selector to Customize a Name:
When the Name Selector first opens, in response to the Add New or Name
selections, the existing or default Name is listed on the Name Line. The
Cursor always defaults to end of the listed Name.
1. Use the navigation buttons on the remote control to place the
Highlighter over the first letter in the new name and press the Enter
button to put the highlighted letter on the Name Line at the current
Cursor location.
If you are replacing an existing name, select the Clear button first to
erase the existing name.
To modify an existing name, use the Cursor buttons to move the
Cursor to any existing letter position or to the end of the existing
name. Pressing the Delete key erases the letter in the Cursor position.
Selecting a new letter on the Keyboard and then pressing Enter inserts
the new letter into the Cursor position.
2. Repeat Step 1 to spell out the new name.
3. When the desired name is displayed on the Name Line, move the
Highlighter to the Save button.
4. Press Enter to save the new name.
The Name Selector compares the new name to those currently in use.
If the name is a repeat, the Nº502 displays an error message,
indicating that the entered name is already in use and prompting you
to select a different name.
You have now created a custom name.
When the name is saved, the Name Selector closes and the Nº502
automatically returns to the Setup menu you were in previous to selecting
the Name menu option. The new name is displayed in the menu path at
the top of the menu, indicating that you are now editing the new Setup,
Profile, or Activity.