Mark Levinson 5302 - Specifications

20
N
0
5302 POWER AMPLIFIER / OWNER’S MANUAL
SPECIFICATIONS
SPECIFICATIONS
STEREO MODE
Output Power: 135W/channel, 8Ω load, 20Hz to 20kHz, at <0.35% THD, both channels driven
270W/channel, 4Ω load, 20Hz to 20kHz
Gain: 25.8dB
Input Sensitivity: 145mV RMS input for 2.83V RMS output
Total Harmonic Distortion: <0.04% at 1kHz, 135W, 8Ω load
<0.35% at 20kHz, 135W, 8Ω load
Signal-To-Noise Ratio: >102dB, 20Hz to 20kHz, wideband, unweighted, referred to 135W/8Ω
BRIDGED MONAURAL MODE
Output Power: 275W, 8Ω load, 20Hz to 20kHz, at <0.3% THD
550W, 4Ω load, 20Hz to 20kHz
Gain: 31.8dB
Input Sensitivit: 73mV RMS input for 2.83V RMS output
Total Harmonic Distortion: <0.04% at 1kHz, 275W, 8Ω load
<0.3% at 20kHz, 275W, 8Ω load
Signal-To-Noise Ratio: >105dB, 20Hz to 20kHz, wideband, unweighted, referred to 275W/8Ω
GENERAL
Frequency Response 20Hz to 20kHz, +0/–0.35dB
<2Hz to 80kHz, +0/–3dB
Input Impedance: Balanced (XLR): 100kΩ
Unbalanced/single-ended (RCA): 50kΩ
Input Connectors: 1 pair balanced line-level inputs (XLR)
1 pair single-ended line-level inputs (RCA)
Output Connectors: 2 pairs high current multi-way binding posts