Markforged X7 - Unboxing and Assembly; Whats in the Box

5
INDUSTRIAL PRINTER QUICK START GUIDE
UNBOXING AND ASSEMBLY
WHAT’S IN THE BOX
Your Industrial Series printer ships with a number of accessories, listed below. With the exception of the last
two items, everything on the list below can be found in the accessory kit shipped inside your printer.
● Drybox adapter plug
● 2mm hex key
● 2.5mm hex key
● 3mm hex key
● Plastic shim (in envelope)
● Fiber shim (in envelope)
● 3 ber nozzles with PTFE tubes installed
● 5 ber PTFE tubes
● Fiber nozzle torque bit (10mm)
● Plastic nozzle torque bit (7mm)
● Torque wrench
● Plastic load tube and plastic Bowden tube
● USB-A to USB-B cable
● USB-A cable extender
● Tweezers
● Glue stick (applied to print bed before each print)
● Anti-Seize (applied to plastic/ber nozzles when installing)
● Lens-cleaning wipes (used to clean laser lens)
● 3 plastic nozzles
● Wi-Fi antenna
● Scraper
● Scale (1g precision, used for metered material loading)
● Brass brush
● Flush wire cutters
● TrueBed
● Spindle and spindle cap — in cabinet drybox
● Power cord — on top of printer