Marksa CSO Series - 9.4 Pump (C)

Technical Notice CSO/CPO V1.1 / 10.14 Page 51 / 86
Options 9
9.1.3 Pump (C)
9.1.3.1 Description of the option
The pump is either controlled by the CPO unit (1) (customer pump) or directly installed in the CPO unit
(2).
If the pump is installed directly in the unit (2), prime before commissioning (fill the oil pipe and drain).
9.1.3.2 Maintenance
A. Annual control of the pump.
 Traces of oil may indicate a loss of tightness.
9.1.3.3 Troubleshooting
No special troubleshooting procedures.
Fig. 9-4 : Basic schematic
(1) Customer pump (controlled by the unit) (2) Pump installed in the unit
(1)
(2)