Page 60 / 86 Technical Notice CSO/CPO V1.1 / 10.14
9 Options
9.1.8 Pre-heating kit (H)
9.1.8.1 Description of the option
Heating (1) makes it possible to pre-heat water that might be too cold, particularly useful when pre-
heating the machine or when the refrigeration unit(s) are located outside the building.
A safety thermostat (2) protects the tank from inadequacies in the heating system.
Do not change the safety thermostat setting (set in our workshops).
9.1.8.2 Maintenance
No special maintenance procedures.
9.1.8.3 Troubleshooting
No special troubleshooting procedures.
Fig. 9-9 : Basic schematic
(1) Heating (2) Safety thermostat
To Next Page
Loading...