Page 78 / 86 Technical Notice CSO/CPO V1.1 / 10.14
9 Options
9.1.15 High temperature alarm (Z)
9.1.15.1 Description of the option
The high temperature alarm indicates an incorrect operation of the device. This information is forwarded
to the device by the equipment being cooled.
An error is forwarded to the device in the event of overheating. It may be caused by:
- A loss of gas.
- A loss of power capacity.
9.1.15.2 Maintenance
No special maintenance procedures.
9.1.15.3 Troubleshooting
No special troubleshooting procedures.
To Next Page
Loading...