marposs Quick Digit - Page 9

25/10/17
Quick Digit
TM
Bluetooth
®
Driver
9
3.6
CHAPTER 2
Selecting this option it is possible to lock the Quick Digit
TM
Bluetooth
®
buttons in order to avoid a wrong programmation
or a modication of the congurations from the user.
Default 5 minutes, range 1-99 minutes.
With reference to the table below, this option will behave
differently, depending on the rmware installed on the
device.
Software management only
using this feature the driver will take care of sending a
standby command to the Quick Digit
TM
Bluetooth
®
when
the time programmed is elapsed from the last received
measure value. When the timeout period elapses the device
is turned off only if it is connected.
Device rmware management
the driver denes the device timeout so that, once the
Timeout period has elapsed, it is switched off automatically.
Device type
Software management
only
Device rmware
management
STANDARD
12,5 mm
FW Version < 1.17 FW Version ≥ 1.17
25 mm
50 mm
100 mm
HR
12,5 mm
FW Version < 1.24 FW Version ≥ 1.24
25 mm
HR
ANALOG
12,5 mm
FW Version < 1.11
FW Version ≥ 1.11
25 mm