marsden M-950 - Normal Weighing Procedure (Patient on Bed)

10
NORMAL WEIGHING PROCEDURE (patient on
the bed)
Turn On the scale using ON/OFF key.
**(before moving bed on the weigh
bridge)
Setting the PRE-TARE value (bed weight),
scale will automatically perform Tare
function and the minus (-) sign will
appear in front of Pre-Tare value.
Setting Pre-Tare Function please refer
“HOW TO USE PRE-TARE FUNCTION”
(page.14)
Place both the weigh bridges under the bed and push the bed on the
scale.
The upper display will show the net
weight of the patient.
Now if you want BMI also, simply long
press BMI key, the middle display will
show the last height of the patient and
extreme digit will blink. Key in the height
measurement of patient using 0~9 key
and press ENTER key. The third display
will show the BMI of the patient
To print out the weighing result, press
PRINT key.