marsden M-950 - How to Use Pre-Set Tare Function

13
HOW TO USE PRE-TARE FUNCTION
Press ON/OFF to switch on device.
Press TARE key 3sec to enable this
function.
The LCD shows 0.0kg and the Pre-tare
arrow is flashing for input target’s
weight.
Input the weight that you wish to
deduct. Ex: 0.2kg.
Press to finish input.
Now you have 0.2kg as your
deduction.
Weigh 60.2kg and get 60kg as a net
weight.
For multi-interval model, the pre-tare range only possible to set to
50% of full capacity or equal to Max. 1.